[Determination of four amide synthetic cannabinoid isomers by ultra-high performance liquid chromatography-high resolution mass spectrometry].

Isomerization commonly occurs in synthetic cannabinoids (SCs). Owing to the few differences in their structure and properties, it is difficult to simultaneously separate and identify them. Thus, the identification of synthetic cannabinoids is challenging, posing a threat to public security. This study aims to separate and identify four SCs, which are 2-[1-(5-fluoropentyl)-1H-indole-3-formylamino]-3,3-dimethylbutyrate methyl ester (5F-MDMB-PICA), 2-[1-(5-fluoropentyl)-1H-indole-3-formylamino]-3-methylbutyrate ethyl ester (5F-EMB-PICA), N-(1-amino-2,2-dimethyl-1-oxobutyl-2-yl)-1-butyl-1H-indazole-3-formamide (ADB-BINACA), N-(1-carbamoyl-2-methylpropyl)-1-pentyl indazole-3-formamide (AB-PINACA).Supercritical fluid chromatography-mass spectroscopy (SFC-MS) can realize the effective separation of some cannabinoid isomers. However, most laboratories are not equipped with SFC-MS systems. Ultra-high performance liquid chromatography-high resolution mass spectroscopy (UHPLC-HRMS) effectively combines the excellent efficient separation characteristics of liquid chromatography and the powerful qualitative ability of mass spectrometry. It is a commonly used technical method for the detection of amide synthetic cannabinoids and their metabolites in vivo and in vitro because of its advantages of high accuracy and efficiency. Liquid chromatography allows the separation of tested components by exploiting the difference in the partition coefficients between the mobile and stationary phases. When the two phases are in relative motion, the tested components are divided between the two phases, facilitating the separation and analysis of each component. Although the difference in the polarities of the tested amide synthetic cannabinoid isomeric substances is extremely small, liquid chromatography can induce a strong separation effect. The advantages of UHPLC-HRMS include high resolution imparted by mass spectrometry and high sensitivity, allowing its application in the qualitative analysis of various substances. Through UHPLC-HRMS, trace analytes at the nanogram scale as well as pure drugs and their metabolites in biosamples can be detected. This study proposed a method for the determination of two pairs of amide synthetic cannabinoid isomers-5F-EMB-PICA and 5F-MDMB-PICA, ADB-BINACA and AB-PINACA-through UHPLC-HRMS. A Hypersil GOLD C18 column (100 mm×2.1 mm, 1.9 µm) was selected for separation via liquid chromatography, and gradient elution was performed with methanol containing 0.1% formic acid and a 0.1% formic acid aqueous solution containing 10 mmol/L ammonium formate. Full scan/data-dependent secondary mass spectrometry (Full MS/dd-MS2) was conducted in the positive ion mode for detection. The results indicated that the four synthetic cannabinoid isomers could be accurately detected under the abovementioned conditions. The resolution between 5F-EMB-PICA and 5F-MDMB-PICA was 2.06, while that between ADB-BINACA and AB-PINACA was 1.22, indicating the effective separation and detection of both pairs. Furthermore, method validation was conducted to ensure the accuracy of the proposed method. The relationship of the four amide synthetic cannabinoid isomers exhibited excellent linearity. The correlation coefficients (R2) were >0.99. Moreover, the matrix effects of the four SCs in hair samples were between 88.67% and 111.76% and the recoveries were 96.23%-105.11%. The intra-day and inter-day precisions (RSDs) were <10%. The proposed method was used to identify the case materials. AB-PINACA was detected in a hair sample at a content of 0.73 µg/g. 5F-MDMB-PICA was detected in a tobacco sample at a content of 11.3 mg/g. The results indicate that the proposed method can be used for the examination of practical samples conducted by public security organizations. This study provides a reference method for the identification of synthetic cannabinoid isomers.

Prospects of formamide as nitrogen source in biotechnological production processes.

This review presents an analysis of formamide, focussing on its occurrence in nature, its functional roles, and its promising applications in the context of the bioeconomy. We discuss the utilization of formamide as an innovative nitrogen source achieved through metabolic engineering. These approaches underscore formamide's potential in supporting growth and production in biotechnological processes. Furthermore, our review illuminates formamide's role as a nitrogen source capable of safeguarding cultivation systems against contamination in non-sterile conditions. This attribute adds an extra layer of practicality to its application, rendering it an attractive candidate for sustainable and resilient industrial practices. Additionally, the article unveils the versatility of formamide as a potential carbon source that could be combined with formate or CO2 assimilation pathways. However, its attributes, i.e., enriched nitrogen content and comparatively limited energy content, led to conclude that formamide is more suitable as a co-substrate and that its use as a sole source of carbon for biomass and bio-production is limited. Through our exploration of formamide's properties and its applications, this review underscores the significance of formamide as valuable resource for a large spectrum of industrial applications. KEY POINTS: • Formidases enable access to formamide as source of nitrogen, carbon, and energy • The formamide/formamidase system supports non-sterile fermentation • The nitrogen source formamide supports production of nitrogenous compounds.

Insights into alternative cryoprotectants to freeze sperm of domestic cats.

Globalization and habitat destruction pose a significant threat to wildlife felids. Even though conservation banks for genetic materials have been created, the sperm cryopreservation with minimal cell damage is still a great challenge. Thus, this study aimed to compare the effects of two commercial extenders with different concentrations of alternative cryoprotectants on thawed sperm quality of domestic cats. Five adult cats were anaesthetized (using a combination of 40 µg/kg medetomidine associated to 5 mg/kg ketamine), and the semen was collected by electroejaculation (electrical stimulation of 2-3 V). Semen samples were evaluated for sperm characteristics (kinetics, morphology, membrane integrity and morphometry). Subsequently, they were sorted into two aliquots and centrifuged. The aliquots were added to a commercial extender containing 3% glycerol and 2% methylformamide (extender I) or 2% glycerol and 3% methylformamide (extender II), frozen, thawed (37°C/30 s) and reevaluated. Comparatively, the sperm kinetics and membrane integrity of fresh semen were higher (p < .002) than frozen samples in extender I and II. Total and progressive motility were lowest in the thawed samples. However, the subjective analysis indicated high sperm motility, since the kinetics evaluation was impaired by the low cell number in the thawed samples. There were no differences in sperm morphology between the groups. In the sperm morphometric analysis, a significant difference (p = .04) was identified in the length of the intermediate piece in extender II samples compared with fresh and extender I. Thus, it can be concluded that although the concentrations tested did not maintain the kinetic parameters and membrane integrity of spermatozoa after thawing, the extender with a lower concentration of glycerol was less toxic for maintaining the midpiece length.

Efficient extraction of oleoresin from Ferula gummosa roots by natural deep eutectic solvent and its structure and chemical characterizations.

Deep eutectic solvents in the extraction of plant metabolites have found many advantages, such as low toxicity, biodegradability, low cost and ease of preparation over the conventional methods. This work aims to compare natural deep eutectic solvents in extraction and optimization of oleoresin from Ferula gummosa and determining its chemical and structure properties. Box-Behnken design was applied to optimize the extraction of oleoresin from Ferula gummosa using eutectic solvents. The variables of extraction were extraction time, temperature, and ratio of eutectic solvents. Six mixtures of eutectic solvents including choline chloride/urea, acetic acid, lactic acid, formic acid, formamide and glycerol at ratios of 2:1 and 3:1 were evaluated. The highest yields were obtained for choline chloride/formic acid, choline chloride/formamide. The quadratic regression equation was set up as a predictive model with an R2 value of 0.85. The optimum condition was 6 h, 40 °C, and ratio 12.5% (w/v). No significant difference was found between the predicted and experimental yield. The main components of the oleoresin were ß-pinene (40.27%), cylcofenchen (11.93%) and α-pinene (7.53%) as characterized by gas chromatography-mass spectrometry. The chemical structure study by spectroscopy showed that no solvents remained in the oleoresin. Therefore, F. gummosa oleoresin can be explored as a novel promising natural pharmaceutical ingredient extracted with eutectic solvents.

Prebiotic Synthesis of 3',5'-Cyclic Adenosine and Guanosine Monophosphates through Carbodiimide-Assisted Cyclization.

3',5'-Cyclic nucleotides play a fundamental role in modern biochemical processes and have been suggested to have played a central role at the origin of terrestrial life. In this work, we suggest that a formamide-based systems chemistry might account for their availability on the early Earth. In particular, we demonstrate that in a liquid formamide environment at elevated temperatures 3',5'-cyclic nucleotides are obtained in good yield and selectivity upon intramolecular cyclization of 5'-phosphorylated nucleosides in the presence of carbodiimides.

Carbon neutral hydrogen storage and release cycles based on dual-functional roles of formamides.

The development of alternative clean energy carriers is a key challenge for our society. Carbon-based hydrogen storage materials are well-suited to undergo reversible (de)hydrogenation reactions and the development of catalysts for the individual process steps is crucial. In the current state, noble metal-based catalysts still dominate this field. Here, a system for partially reversible and carbon-neutral hydrogen storage and release is reported. It is based on the dual-functional roles of formamides and uses a small molecule Fe-pincer complex as the catalyst, showing good stability and reusability with high productivity. Starting from formamides, quantitative production of CO-free hydrogen is achieved at high selectivity ( > 99.9%). This system works at modest temperatures of 90 °C, which can be easily supplied by the waste heat from e.g., proton-exchange membrane fuel cells. Employing such system, we achieve >70% H2 evolution efficiency and >99% H2 selectivity in 10 charge-discharge cycles, avoiding undesired carbon emission between cycles.

Prebiotic Synthesis of N-Formylaminonitriles and Derivatives in Formamide.

Amino acids and their derivatives were probably instrumental in the transition of prebiotic chemistry to early biology. Accordingly, amino acid formation under prebiotic conditions has been intensively investigated. Unsurprisingly, most of these studies have taken place with water as the solvent. Herein, we describe an investigation into the formation and subsequent reactions of aminonitriles and their formylated derivatives in formamide. We find that N-formylaminonitriles form readily from aldehydes and cyanide in formamide, even in the absence of added ammonia, suggesting a potentially prebiotic source of amino acid derivatives. Alkaline processing of N-formylaminonitriles proceeds with hydration at the nitrile group faster than deformylation, protecting aminonitrile derivatives from reversion of the Strecker condensation equilibrium during hydration/hydrolysis and furnishing mixtures of N-formylated and unformylated amino acid derivatives. Furthermore, the facile synthesis of N-formyldehydroalanine nitrile is observed in formamide from glycolaldehyde and cyanide without intervention. Dehydroalanine derivatives have been proposed as important compounds for prebiotic peptide synthesis, and we demonstrate both a synthesis suggesting that they are potentially plausible components of a prebiotic inventory, and reactions showing their utility as abiotic precursors to a range of compounds of prebiological interest.

Emissions of Formamide and Ammonia from Foam Mats: Online Measurement Based on Dopant-Assisted Photoionization TOFMS and Assessment of Their Exposure for Children.

Formamide has been classified as a Class 1B reproductive toxicant to children by the European Union (EU) Chemicals Agency. Foam mats are a potential source of formamide and ammonia. Online dopant-assisted atmospheric pressure photoionization time-of-flight mass spectrometry (DA-APPI-TOFMS) coupled with a Teflon environmental chamber was developed to assess the exposure risk of formamide and ammonia from foam mats to children. High levels of formamide (average 3363.72 mg/m3) and ammonia (average 1586.78 mg/m3) emissions were measured from 21 foam mats with three different raw material types: ethylene-vinyl acetate (EVA: n = 7), polyethylene (PE: n = 7), and cross-linked polyethylene (XPE: n = 7). The 28 day emission testing for the selected PE mat showed that the emissions of formamide were 2 orders of magnitude higher than the EU emission limit of 20 µg/m3, and formamide may be a permanent indoor contaminant for foam mat products during their life cycle. The exposure assessment of children aged 0.5-6 years showed that the exposure dose was approximately hundreds of mg/kg-day, and the age group of 0.5-2 years was subject to much higher dermal exposures than others. Thus, this study provided key relevant information for further studies on assessing children's exposure to indoor air pollution from foam mats.

Hydrogen bonds of OCNH motif in rings in drugs: A molecular electrostatic potential analysis.

The OCNH unit is one of the most frequently encountered structural motifs in rings in drugs which serves dual role as the proton donor through NH bond and proton acceptor through the CO bond. Here, we predicted the HB strength (Eint ) of OCNH motif with H2 O for commonly observed 37 rings in drugs with DFT method M06L/6-311++G(d,p). The HB strength is rationalized in terms of molecular electrostatic potential (MESP) topology parameters ΔVn(NH) and ΔVn(CO) which describe the relative electron deficient/rich nature of NH and CO, respectively, with respect to the reference formamide. The Eint of formamide is -10.0 kcal/mol whereas the Eint of ring systems is in the range -8.6 to -12.7 kcal/mol-a minor increase/decrease compared to the formamide. The variations in Eint are addressed using the MESP parameters ΔVn(NH) and ΔVn(CO) and proposed the hypothesis that a positive ΔVn(NH) enhances NH…Ow interaction while a negative ΔVn(CO) enhances the CO…Hw interaction. The hypothesis is proved by expressing Eint jointly as ΔVn(NH) and ΔVn(CO) and also verified for twenty FDA approved drugs. The predicted Eint for the drugs using ΔVn(NH) and ΔVn(CO) agreed well with the calculated Eint . The study confirms that even delicate variations in the electronic feature of a molecule can be quantified in terms of MESP parameters and they provide a priori prediction of the HB strength. The MESP topology analysis is recommended to understand the tunability of HB strength in drug motifs.

La-Catalyzed Decarbonylation of Formamides and Its Applications.

Herein we report the first catalytic decarbonylation and decarbonylative hydroamination of formamides without using additives enabled by a redox-neutral rare earth catalyst. The protocol displays complete N-aryl/alkenyl formamide-selectivity, thus providing a wide variety of creative uses of the N-formylation and N-deformylation method and opening up new prospects for minimizing waste and controlling the required selectivity in amine transformation events.

Sperm factors associated with the production of equine blastocysts by intracytoplasmic sperm injection (ICSI) using frozen/thawed semen.

Intracytoplasmic Sperm Injection (ICSI) using frozen/thawed sperm is a common procedure to obtain embryos from fertile or subfertile mares and stallions. Stallion-associated factors that impact the efficiency of ICSI have been studied less than those associated with the mare. Three experiments were conducted: Experiment 1: the effect of freezing extender composition and cryoprotectant; Experiment 2: the effect of sperm exposure to seminal plasma prior to freezing (ejaculated vs. epididymal sperm; two-freeze/thaw cycles each); and Experiment 3: the effect of sperm morphologic feature used for fertilization (normal vs. cytoplasmic droplet vs. bent tail); on the blastocyst rate after ICSI. In Experiment 1, stallion sperm was cryopreserved using commercially available extenders containing: a) 2% egg-yolk + milk + 4% glycerol (MFR5); b) 2% egg-yolk + milk + 2% glycerol + 3% methyl formamide (CMMFR5); c) 20% egg-yolk + 4.75% glycerol (LE); or d) 20% egg-yolk + 2% glycerol + 3% methyl formamide (CMLE). Sperm from each of the treatment groups were used for Piezo-driven ICSI on in vitro-matured equine oocytes (n = 321). Extender CMLE resulted in a lower cleavage rate (35%) than the other treatment groups (MFR5: 74%, CMMFR5: 62%, LE: 68%; P < 0.05). Extender MFR5 yielded a higher blastocyst rate per injected oocyte (21/82 [26%]) than the Groups LE (8/77 [10%]), CMLE (4/80 [5%]) or CMMFR5 (4/82 [5%]; P < 0.05). Extender MFR5 also yielded a higher blastocyst rate per cleaved oocyte (34%) than Groups LE, CMLE or CMMFR5 (15%, 14%, 8%; respectively P < 0.05). In Experiment 2, ejaculated (EJ) and epididymal (EPD) sperm from a fertile stallion which was initially cryopreserved in the CMLE extender, was thawed and re-cryopreserved in MFR5 extender for use in ICSI. Sperm from both groups (EJ vs. EPD) were used for ICSI on in vitro matured oocytes (n = 127). Differences were not detected for cleavage rate (EJ: 36/63 [57%] vs. EPD: 49/64 [77%]), blastocyst rate per injected oocyte (EJ: 11/63 [17%] vs. EPD: 11/64 [17%]), or blastocyst rate per cleaved oocyte (EJ: 31% vs. EPD: 22%) between treatment groups (P > 0.05). In Experiment 3, morphologically normal sperm (N), or sperm with proximal droplets (PD) or bent tails (BT), were obtained from a single fertile stallion and were used for ICSI on in vitro matured oocytes (n = 75). No differences were detected among treatment groups for cleavage rate (N: 19/25 [77%] vs. PD: 20/25 [88%] vs. BT: 18/25 [72%]), blastocyst rate per injected oocyte (N: 6/25 [24%] vs. PD: 5/25 [20%] vs. BT: 2/25 [8%]), and blastocyst rate per cleaved oocyte (N: 32% vs. PD: 23% vs. BT: 11%; P > 0.05). In conclusion, the current study indicates that freezing extender composition used for stallion sperm cryopreservation has an impact on the developmental competence of in vitro-matured equine oocytes after ICSI and in vitro culture. Furthermore, we were unable to detect differences on cleavage and blastocyst rates when performing ICSI when using: 1) ejaculated or epididymal sperm; or 2) sperm with different morphologic features. The results from the current study provide additional insight regarding stallion-related factors that should be considered when performing ICSI in horses.

Carbon nanodots with a controlled N structure by a solvothermal method for generation of reactive oxygen species under visible light.

Carbon nanodots can function as photosensitizers that have the ability to generate reactive oxygen species such as singlet oxygen, hydroxy (OH) radicals, and superoxide ions. However, most of these can only be generated upon ultraviolet light excitation. Additionally, the mechanism of reactive oxygen species generation by carbon nanodots remains unclear. The development of carbon nanodots that can photosensitize under visible light irradiation is desirable for applications such as photodynamic therapy and pollutant decomposition under visible light. Here, we report novel carbon nanodot-based photosensitizers that generate reactive oxygen species under visible light; they were synthesized using a solvothermal method with two solvents (formamide and water) and amidol as the carbon source. Carbon nanodots from the solvothermal synthesis in formamide showed blue fluorescence, while those obtained in water showed green fluorescence. The photo-excited blue-fluorescent carbon nanodots produced OH radicals, superoxide ions, and singlet oxygen, and therefore could function as both type I and type II photosensitizers. In addition, photo-excited green-fluorescent carbon nanodots generated only singlet oxygen, therefore functioning as type II photosensitizers. It is proposed that the two photosensitizers have different origins of reactive oxygen species generation: the enrichment of graphitic N for blue-fluorescent carbon nanodots and molecular fluorophores for green-fluorescent carbon nanodots.

Intermolecular amide and aldehyde interactions: rotational spectroscopy of the complexes of formaldehyde with 2-azetidinone and formamide.

The binary intermolecular complexes of amides and formaldehyde can be taken as suitable models to investigate the non-covalent interactions of a peptide with the carbonyl group. We herein studied the rotational spectra of the model complexes of 2-azetidinone-H2CO and formamide-H2CO generated in a helium supersonic jet. For each complex, one rotational spectra featuring hyperfine structures caused by the 14N quadrupole coupling effect was observed and assigned to its global minimum conformation. The detected isomers of both studied complexes are stabilized by a dominant amide hydrogen bond N-H⋯OC and a weaker C-H⋯O interaction, preferring the Cs symmetry. NBO and SAPT analyses provide quantitative estimation of the non-covalent interactions stabilizing the complexes.

Stereoselective Synthesis of (E)- and (Z)-Isocyanoalkenes.

(E)- and (Z)-isocyanoalkenes were selectively synthesized via the sequential cross coupling of vinyl iodides with formamide, followed by dehydration. The optimal catalyst, generated in situ from CuII and trans-N,N'-dimethyl-1,2-cyclohexanediamine, rapidly coupled (E)- or (Z)-vinyl iodides with formamide, which minimized the isomerization of the resultant vinyl formamide. The method efficiently provided a range of acyclic, carbocyclic, and heterocyclic isocyanoalkenes; the versatility is illustrated with the selective, stereodivergent syntheses of the diastereomeric isocyanoalkene antibiotics, B371 and E-B371.

A More Sustainable Isocyanide Synthesis from N-Substituted Formamides Using Phosphorus Oxychloride in the Presence of Triethylamine as Solvent.

A simple, green, and highly efficient protocol for the synthesis of isocyanides is described. The reaction involves dehydration of formamides with phosphorus oxychloride in the presence of triethylamine as solvent at 0 °C. The product isocyanides were obtained in high to excellent yields in less than 5 min. The method offers several advantages including increased synthesis speed, relatively mild conditions, and rapid access to large numbers of functionalized isocyanides, excellent purity, increased safety, and minimal reaction waste. The new approach of synthesising dehydrative isocyanides from formamides is significantly more environmentally-friendly than prior methods.

In situ activation of COOH-functionalized ZIF-90-enabled reductive CO2N-formylation.

A heterogeneous ZIF-90-based catalyst functionalized with COOH and with a porous structure was facilely prepared for efficient CO2 adsorption and activation to undergo reductive N-formylation with a wide range of amines (15 examples) to furnish N-formamides (78-94% yields). The -COO- species generated by an in situ interaction with amine acts as a key species for activating hydrosilane to capture CO2, and remarkably facilitates a cascade C-N coupling and hydrogenation process. Our findings show a facile strategy for the rational construction of robust active sites for reductive CO2 valorization.

Centrifugal dynamic hybridization conducted in a microfluidic chip for signal enhancement in nucleic acid tests.

A rotating platform has been developed using a centrifugal chip holder to mount the standard chips for liquid delivery achieved by centrifugal pumping. This platform allows for dynamic hybridization to be performed in the microchannels constructed in the standard chips made using the 50 mm × 75 mm glass slides which allows for fast hybridization reactions. The results show that when the oligonucleotide-oligonucleotide hybridization is performed, there is good differentiation between perfectly complementary strands over 1 bp-mismatching counterparts when the long target strand is firstly immobilized and the short probe is secondly hybridized (Method 2), but not when the short probe is first immobilized, and the long target is subsequently hybridized (Method 1). When the differentiation between immobilized ginseng PCR product strands is performed, the correct result is achievable by Method 1, after signal enhancement and addition of formamide. The use of Method 2 is successful only when the PCR strand is captured, but not immobilized. In both methods, proper differentiation is achievable using the N1Q probe, un-achievable without centrifugal hybridization.

Azoles as Auxiliaries and Intermediates in Prebiotic Nucleoside Synthesis.

4,5-Dicyanoimidazole and 2-aminothiazole are azoles that have previously been implicated in prebiotic nucleotide synthesis. The former compound is a byproduct of adenine synthesis, and the latter compound has been shown to be capable of separating C2 and C3 sugars via crystallization as their aminals. We now report that the elusive intermediate cyanoacetylene can be captured by 4,5-dicyanoimidazole and accumulated as the crystalline compound N-cyanovinyl-4,5-dicyanoimidazole, thus providing a solution to the problem of concentration of atmospherically formed cyanoacetylene. Importantly, this intermediate is a competent cyanoacetylene surrogate, reacting with ribo-aminooxazoline in formamide to give ribo-anhydrocytidine ─ an intermediate in the divergent synthesis of purine and pyrimidine nucleotides. We also report a prebiotically plausible synthesis of 2-aminothiazole and examine the mechanism of its formation. The utilization of each of these azoles enhances the prebiotic synthesis of ribonucleotides, while their syntheses comport with the cyanosulfidic scenario we have previously described.

Interaction of Glutamic Acid/Protonated Glutamic Acid with Amide and Water Molecules: A Theoretical Study.

Amino acids are important nitrogen-containing compounds and organic carbon components that exist widely in the atmosphere. The formation of atmospheric aerosols is affected by their interactions with amides. The dimers formed by glutamic acid (Glu) or protonated glutamic acid (Glu+) with three kinds of amide molecules (formamide FA, acetamide AA, urea U) and the hydrated clusters formed by Glu or Glu+, U molecules along with one to six water molecules were systematically studied at the M06-2X/6-311++G(3df,3pd) level. U is predicted to form a more stable structure with Glu/Glu+ than FA and AA by thermodynamics. If the concentration ratio of FA to U is less than 104, U will play a critical role in NPF. The degree of hydration in Glu+-mU-nW is higher than that of Glu-mU-nW (m = 0, 1; n = 0-6) clusters. Notably, Glu contributes more to the Rayleigh scattering properties than glutaric acid and sulfuric acid, and thus may lead to the destruction of atmospheric visibility. This study is helpful to better understand the properties of organic aerosols containing amino acids or amides.

Access to N-CF3 Formamides by Reduction of N-CF3 Carbamoyl Fluorides.

The departure into unknown chemical space is essential for the discovery of new properties and function. We herein report the first synthetic access to N-trifluoromethylated formamides. The method involves the reduction of bench-stable NCF3 carbamoyl fluorides and is characterized by operational simplicity and mildness, tolerating a broad range of functional groups as well as stereocenters. The newly made N-CF3 formamide motif proved to be highly robust and compatible with diverse chemical transformations, underscoring its potential as building block in complex functional molecules.